Base edge bevel guides are more elaborate devices that hold a longer file at the desired angle off the base surface. Side edge bevel guides are normally cast and precision machined to the desired angle, and the file is attached by means of a spring clip or screws. If you're unsure what's best for you, it's probably safest to go with the factory bevels for your ski or board and try to maintain them. Freeriders and all mountain skiers usually like something in between, typically 1 and 1. File guides (both adjustable and fixed angle) are available for both base and side edges to ensure that your file stays at this angle as it cuts.īase and side edge bevels vary according to ski type and intended usage, with racers often preferring a nearly flat base bevel and 2 or 3 degrees of side edge bevel, and park riders often choosing up to a 3 degree base edge bevel with 2 or 3 degrees side. 5˚ and 1˚, to make the edge more forgiving and less likely to “hook.” The side edge is usually beveled correspondingly at around 89˚. Instead, they are beveled slightly away from the snow, usually between. Ski and snowboard edges normally have a 90˚ profile when they come from the factory, but they aren’t perfectly square to the base of the ski. When maintaining your edges yourself, you’ll need a file guide to preserve the bevel of your edges. A diamond stone is also small and light enough to carry in your pocket or pack while you’re on the hill. Edges damaged by impact are harder than normal a coarse or medium diamond stone is usually the best bet for smoothing these out. If you have burrs in your edges from hitting rocks or other objects, you may have trouble removing them with a regular file. Some manufacturers are better at this than others, so it’s wise to take a careful look at new skis or boards before using them. Skis and snowboards normally come from the factory with a finished tune that includes a flat base and smooth, sharp edges. Whether you go to a professional or do it yourself, there is always some tuning you can easily perform at home with the right tools. You may choose to do some or all of your tuning at home, or you may want to bring your gear to a professional ski shop like evo Seattle, evo Portland, evo Denver, evo Salt Lake, evo Snoqualmie Pass, or evo Hood River where they have skilled technicians and machines that can do a perfect job.ĭepending on how often you go to the mountain, you may only need to get your skis or snowboard tuned once per year if you ride a lot you may need work done weekly. Having sharp edges, a flat base, and a good wax job can make all the difference between an epic and terrible day. If you want to keep your skis or snowboard performing like they’re designed to, it’s important to tune them regularly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |